audyssey

  1. dbull058

    Question Bizarre problem - Rear Dolby modules not working when Audyssey is on (Denon 6700)

    I just set up my home theater with a Denon 6700 and a 7.2.4 setup using Elac speakers and Dolby modules. All is working well except for one quite odd problem. I'm wondering if others with this (or similar) setup can check if they have the issue, or if anyone can suggest a fix. Basically...
  2. lifereinspired

    Audyssey LFC

    Hi, We live in an apartment building with 40 units. We currently have an Onkyo TXNR626 7.2 Channel AVR for our home theater. We've had it 6 years & it was a previous model year when we purchased. We're having issues with sound. Basically, a lot of the stuff we watch has the music and effects...
  3. Maninblack

    For Sale Marantz AV8801 A/V pre-amplifier and AUDYSSEY Pro Installer Kit Calibration Microphone system

    1 x Marantz AV8801 11.2 channel A/V pre-amplifier. Near MINT condition. No scratches. No damage. Worked last time I tried. I have sold my speakers. It was last heard and seen working 03/09/2020 Includes original packaging and manual. Remote control and calibration microphone. AV8801 £800 ONO...
  4. Jenz

    Audyssey say Sub is too High- cannot get it lower?

    I moved some speakers around recently and reran Audyssey. My XTZ Cinema 1x12 Sub (on the back of the Sub) is set to: Low Pass Filter Off Maximum Crossover (160Hz) Volume (Gain) is set to the Ref setting - which I believe means that the AVR sets it. When I run Audyssey Xt32 on my Denon X6400H...
  5. R

    Onkyo tx sr608 vs HK 3270, and Audyssey

    Hello everyone, I recently bought the Onkyo (I was basically bored and found a nice one fora great price, but the Audyssey mic is missing). Until now I was using the HK hooked to a pair of Sony SSF6000 8ohm speakers. I'm only using it for music. Now, the thing is that I think the HK sounds...
  6. P

    audyssey

    Hi all I start this thread to give my impression on a topic that I think could be interesting ... audyssey, we all know this system and for years it has been at the forefront of av system calibrations, but I think that little by little they are lagging behind, the audyssey multieq app is not bad...
  7. Umar1st

    Denon X2200w / Tannoy HTS 101 XP Audyssey Crossovers & Bass Management

    Hi All I've recently been doing some reading into crossovers and bass management. Initially when I bought my system, all I did was run through the setup Audyssey, wiring in the mic and going through the setup. Turned the switch from auto to always on with the sub, left it at phase 0, maxed...
  8. buffeh

    Monitor Audio Bronze Centre - Audyssey Crossover set high

    Hello, I recently purchased Monitor Audio Bronze speakers - 2 Bronze 2 bookshelves, 2 Bronze FX rear speakers, and a Bronze centre. Upon running Audyssey setup on my Denon 3500 it detected the Bookshelves (the Bronze 2's) and the FXs crossover at 60hz which is great but much to my annoyance it...
  9. D

    Question Audyssey Room EQ and Speaker Level Settings

    If I run the Audyssey room EQ on my amp (Denon AAVR-X3500H), does this set the correct volume levels for each speaker? Are manual level settings and Audyssey setup mutually exclusive? The reason I'm asking is because when I got my system, I ran the Audyssey setup, but I feel that the surround...
  10. P

    Question Audyssey XT32 help needed on tweaking subwoofer / bass etc on Monitor Audio Silver system

    Dear all As an addition to my recent thread 'Worth replacing a Monitor Audio RXW12 sub with something more exotic!?', I wonder if anyone can give me some advice on the Audyssey XT32 images from the latest results I had yesterday on our system? I am a complete novice so any help would be...
  11. V

    Question Audyssey Calibration feedback

    Hi all, Forgive me if this is the wrong part of the forum to post in, I was torn between posting here and in the Home Cinema DIY forum, I hope this is the right place! Over the past 1,5 years I have turned our unused cellar room (squared, about 4,5x4,5 meters/14.7x14.7 feet) into a home...
  12. N

    Question Marantz NR1509 - Audyssey setup not on TV

    Hi. I've just added a centre speaker to my stereo setup and wanted to run Audyssey calibration. I pressed setup on my remote, then speakers, then Audyssey setup. At this point the display goes blank. The setup is shown on the receiver's screen but not on the TV. I've never noticed this before...
  13. westinbye

    Question Speaker Broken or Audyssey Wrong?

    I have a Denon x2600, and 4 bp8 surrounds that I bought second hand. Audyssey was setting my crossover on the fronts to 40 HZ (they are in corners) and rears to over 200 HZ. This seemed so odd that I deced to buy the multeq app. I found one outlier speaker that did start to drop off over 200...
  14. Countjedi

    Question Borrow a Audyssey Mic or similer

    I have just changed my speaker set up at home and tried to recollabraate the speaker's last night. One slight issue it goes through testing the first subwoofer, but goes no further in the set up. I think this could be a mic issue and before I buy a new mic I was wondering if anyone in the...
  15. M

    Audyssey Help

    I have Denon AVRX1200W. PROCINEMA600 SPEAKERS, AND Atlantic Tech 44da Dolby Atmos upfiring speakers. When I set the amp assignment to reflect Dolby Front or any other setting rather than Front Height they sound terrible. Front Height is the only setting that reflects the way the sound used to...
  16. M

    Denon Audyssey help

    After the Dts:x upgrade my system is not acting right. My files display DobyTrueHd/Atmos while looking in Media Info. When playing these files it does not give that option in the sound settings. My sound options display DolbyTHD, Atmos/surround, dolbythd +neural:x. Like I said not one displays...
  17. N

    Question Denon x3500h no output from subwoofer

    Hello guys, So I am totally stumped here. Been running a 3.1 config and recently purchased a sub (Velodyne spl800i) . Connected it up, it powered on and Audyssey picks it up and the setup completed. However no bass is produced from the sub when I listen to music via Spotify connect or when...
  18. stegalv

    New denon 8500 audyssey app or onboard setup

    Just picked up my 8500 amp,is the app worth downloading or is the onboard setup ok
  19. ziggurcat

    Marantz SR6014 Audyssey XT32 low Subwoofer trim?

    Hi there, Just got a Marantz SR6014, ran Audyssey, and it set the trim of the subwoofer to -10dB vs. a range of -3 to -5dB for the remaining speakers. I had gone through the level matching step to lower the sub volume to measure at around 75dB prior to going through the calibration process...
  20. Eugene Zekai

    How to get better sound out of your Home Theater?

    Hi everyone. A couple of months ago I have dwelled in the realm of HT. Although separate speakers are a step in the right direction than my Samsung K950, i still feel like something is missing. Sounds in not so engaging and bass feels just OK. I am currently running Marantz SR6013, Tannoy...
Top Bottom