preamp

A preamplifier (preamp) is an electronic amplifier that prepares a small electrical signal for further amplification or processing. They are typically used to amplify signals from microphones, instrument pickups, and phonographs to line level. Preamplifiers are often integrated into the audio inputs on mixing consoles, DJ mixers, and sound cards. They can also be stand-alone devices.
A preamplifier is often placed close to the sensor to reduce the effects of noise and interference. It is used to boost the signal strength to drive the cable to the main instrument without significantly degrading the signal-to-noise ratio (SNR). The noise performance of a preamplifier is critical. According to Friis's formula, when the gain of the preamplifier is high, the SNR of the final signal is determined by the SNR of the input signal and the noise figure of the preamplifier.
In a home audio system, the term 'preamplifier' may sometimes be used to describe equipment which merely switches between different line level sources and applies a volume control, so that no actual amplification may be involved. In an audio system, the second amplifier is typically a power amplifier (power amp). The preamplifier provides voltage gain (e.g., from 10 mV to 1 V) but no significant current gain. The power amplifier provides the higher current necessary to drive loudspeakers.
Three basic types of preamplifiers are available:
current-sensitive preamplifier
parasitic-capacitance preamplifier
charge-sensitive preamplifier.

View More On Wikipedia.org
  1. P

    CAMBRIDGE AUDIO DacMagic 200M / MQA TIDAL

    Hey all, got the CA and signed up for TIDAL in order to get MQA. When connected via my iPad PRO (USB C to USB B) MQA is not recognised, in fact the moment I start the song the whole bar is lightening up like a disco but can't establish a proper MQA signal. Anything else, like FLAC or even Apple...
  2. E

    Built in preamp or avr phono ?

    I have a fluance rt81 turntable with built-in preamp and a denon AVR-S660H with dedicated phono input , which would sound better to use or would an external preamp sound better? Thanks !
  3. negazione

    Question How to connect two active speakers to Marantz 1200 preamp outputs to get a regular stereo sound?

    Hi! How to connect two active speakers to Marantz 1200 preamp outputs to get a regular stereo sound? Do I need to use Zone 2 or there is some other way to manage this?
  4. P

    Question Connecting multichannel prepro & stereo preamp to the same multichannel amplifier?

    All, Please provide some clarification on the following, if you have a minute. I have a Yamaha MX-A5200 multichannel amplifier (11 channels total). Only 5 channels on it are currently used by a Yamaha CX-A5200 multichannel preamp processor a.k.a 5 speakers are connected. Hence, there are...
  5. G

    Turntable Preamp

    Hi I wonder if anybody could give me some advice. I have a Aiwa PX-E860K turntable ( 80s/90s vintage I think ) and I think I need a preamp. I live in a small semi detached bungalow so using speakers for my albums is not really an option so will be using bluetooth headphones. I do not need...
  6. ruffbadger

    Split Phono Balanced Preamp Output

    Hi All We are carrying out a home refurbishment and it has thrown up a few curveballs from an audio stand point. My issue is I have a cabinet which will housemy turntable that is several meters from the main hifi rack. I have a Pro Ject phono amp (Rs2 I believe0 with balanced outputs that will...
  7. P

    High to Low converter

    Hi everyone, I have an AV receiver Onkyo TX SR608. and my speaker are ADAM T5V, preamp. because my speakers are preamp I can't connect them directly to the AV receiver. Someone suggested to use a Speaker-level to Line-level Adapter but most of them on amazon or ebay only handle up to 50w. The...
  8. S

    Question Is there any preamp with IR receiver compatible with Samsung TV universal remote?

    I have Samsung TV, a Modi Multibit DAC and a pair of KRK powered monitors. I would like to output TV sound using optical into the DAC and then add a preamp with IR receiver between the DAC and the powered monitors, so I can control the volume remotely, ideally from the same Samsung TV remote...
  9. C

    Marantz home stereo

    I have a Marantz tt-15s1 and a 70s Marantz receiver I’m running it thru. Now, in the receiver got a preamp in it or do I need to invest in a separate preamp? Also I’m planning to listen with nice phones so I guess I’m asking do I need anything additional to get the perfect tone? Thanks in advance!
  10. lincolnberryiii

    Question Bluetooth Transceiver?

    I need recommendations: I'm looking for a bluetooth preamp that can receive bluetooth audio from a mobile device and then transmit that signal to a bluetooth sound bar while also outputting Mono LFE over RCA to a powered subwoofer. Please see attached illustration for reference. Note that the...
  11. S

    Do I need a preamp?

    I'm wondering whether to buy a preamplifier, but I've never owned one before and I'm not totally certain whether one would improve my set-up. I have an Audio Technica AT-LP120X turntable, an old NAD 3020e amplifier and Mission LX1 speakers - I got the speakers (and a new Audio Technica stylus...
  12. S

    Klipsch Powered Sub

    I have a Klipsch Synergy Black Label Sub-100 which is active & only has RCA line in. What is the best option of connecting to it to a TV that does have RCA outputs? A direct hook up doesn't give the subwoofer a good sound. I have it connected now using a mini amp which doesn't have sub out so...
  13. quokeepac

    Question Preamp the Klipsch Reference RP-8000F II for my Denon X3800H

    I recently bought a home cinema bundle and a receiver. I am new to this so I don't know what to buy. My setup is : 2 Klipsch Reference RP-8000F II 1 Klipsch Reference RP-504C II 2 Klipsch Reference RP-502S II 2 Klipsch Reference RP-500SA II 1 Klipsch Reference SPL-120 Denon X3800H In this...
  14. M

    Lyngdorf, RP & REW

    Hi - as mentioned on the Lyngdorf thread, I've decided to create a new one here, to avoid clogging the original with specific issues I have with the above. Some of it relates to RoomPerfect, & subsequent measuring / tuning with monitoring using REW tool. Hope it may be of use to others also...
  15. J

    Budget Surround Sounds Processor?

    I'm looking for a reasonably priced preamp/surround processor. I had an Outlaw 975 but a couple of the connectors went bad. Any suggestions?
  16. David Alexander

    Bi Amping L + R from a single amplifier

    I have an X4800H with 11 preouts. Is there any issue using 4 channels of a 7 channel amplifier to bi amp the two front speakers? In this case the amp would then power L C R and surrounds (7 channels total) with the AVR handling heights (powered) and subs. The amp gives 100 WPC, so bi amped, more...
  17. R

    Recently acquired a Yamaha DSP-Z11, with a few minor faults...

    ....basically bought on the cheap to replace my RX-1065 which I always felt lacked a touch of clarity for the center channel. Anyway, the Z11 sounds great, even music fantastic (ported through Cyrus XPowers to PMCs in case you're interested), played at wall-shaking volumes... The issue is, how...
  18. charp

    Best TT & Preamp

    Hi I have already an Arcam AVR350 and a set of Keff egg speakers (2001) I wish to add, for now, a turntable and the Planar 2 looks favourite for budget etc. As the old Arcam doesn't have a phono would a Rega preamp be best? We will upgrade speakers at a later date but can you confirm this...
  19. Ed Selley

    Tangent PreAmp II and PowerAmpster II Review & Discussion

    Tangent brings some very un-budget ideas to their budget pre and power amplifier. Is this truly affordable exotica or stretching things a little too far? Read the review. Write your own review for Tangent PreAmp II
  20. SGCOTG

    Do I need a preamp

    I have a harman kardon hk 980 integrated amplifier. A Rega Planar turntable with a ortofon 2m red moving magnet cartridge. Do I need a preamp and will it make a major difference to the sound quality. If so what preamps are the best fit.
Back
Top Bottom