Paul7777x
Distinguished Member
- Joined
- Jul 23, 2016
- Messages
- 12,624
- Solutions
- 1
- Reaction score
- 8,120
- Points
- 3,084
- Location
- North east. U.K.
...good idea. I’ll try that. Thanks again.
I'm sorry, I need the mac OS version, thanks!
Anthem MRX 300 / 500 / 700 Series Owners Thread - Part 4
Does the mrx 510 have the ability to use pre amp mode? Ie manually switch off internal amps, hows the feeling on the new x10 line? Read a few glitches on some. No not manually.. well not by remote or switch. As to the bugs and faults. It recently came up on the other thread and some guy was...www.avforums.com
The Keyspan USB to Serial adapter is what most people have used I think, but this might work -
Trendnet TU-S9 TRENDnet TU S9 Shop UK : Ballicom.co.uk : Buy
Trendnet TU-S9 for £8.54(exc) TRENDnet TU S9 TRENDnet TU-S9 USB to Serial Converter Cable (Version v1.xR) Features: Install as a standard Windows COM port, Full RS-232 modem... CLICK LINK to view on Ballicom.co.uk!www.ballicom.co.uk
Yes it is.Can anyone tell me if the latest ARC Genesis is noticeably better than the original version shipped with the MRX 300?
I’m thinking specifically for 2.0, but 5.1 films will get a workout from time to time too.
Hi thanks for the reply!
It´s RCA cables the receiver does not have XLR, i'ts a 720
Yes it is.
Based on this review I would say yes.Can anyone tell me if the AVM 50V will make a better stereo preamp than the MRX 300. I assume the components in the 50 will be a better class than the 300 so that will help. But so far as I can tell, the ARC software version is the same...?
I’m mainly interested in it for stereo with a subwoofer, though it will be used for 5.1 surround as well.
Based on this review I would say yes.
My 15 year old Tag Processor out performer my MRX310 easily.
I use both of those with my 1120. The ATV 4K is no problem whatsoever, the IQ4 is fine as well, even though I'm running it from another room via a 15m optical HDMI cable and a 4K splitter. It's unlikely you're going to need to worry about either of those two too much.The gear connected to the amp will be;
2. ATV 4 K
4. Foxtel IQ4
Latest firmware includes Dolby Vision support, so if the source and display both support it, then you will get Dolby Vision.What does it mean by Dolby Vision compatible? will it play as Dolby Vision or is there a download needed?
Thanks, do you have a link? I can’t see it within the normal events section on the forum
You will need to connect the 820 Video HDMI to the TV and the Audio HDMI to the Anthem.Hi, hope someone can help, I have the mrx720. I’ve got a Samsung tv Q90r which does Hdr10+, I’ve just got a Panasonic ub820 that also does Hdr10+, unfortunately the Anthem doesn’t. Therefor I need to go Hdmi video from the ub 820 to the tv on the one connect box , which Hdmi port do I use for this?at the moment I use Hdmi arc out from the Anthem to Hdmi arc on the tv. I know I will have to use the Hdmi audio out from the Blu-ray player to the Anthem . Do I connect this to the second Hdmi out on the Anthem. Hope someone can help thankyou.
Hi orange55,You will need to connect the 820 Video HDMI to the TV and the Audio HDMI to the Anthem.