bogart99
Prominent Member
Might be a tad off topic but here goes. The heating/hot water boiler is in an outbuilding some 20m from the main house. Currently the boiler gets the signal to switch on via an underground cable. Now this is the problem it is just a
piece of T&E buried about a foot below the surface, not an ideal arrangement. I had intended digging it up in spring and replacing with SWA. Then I thought could I not control it wirelessly? I have a Drayton Wiser arrangement but as my boiler is old it does not have the Opentherm arrangement so cannot control directly wirelessly. So what I need is some gizmo that can covert a 240v live signal to a rf signal with the reverse gizmo in the boiler house. Any suggestions? The boiler house is well covered by the house wifi.
piece of T&E buried about a foot below the surface, not an ideal arrangement. I had intended digging it up in spring and replacing with SWA. Then I thought could I not control it wirelessly? I have a Drayton Wiser arrangement but as my boiler is old it does not have the Opentherm arrangement so cannot control directly wirelessly. So what I need is some gizmo that can covert a 240v live signal to a rf signal with the reverse gizmo in the boiler house. Any suggestions? The boiler house is well covered by the house wifi.
Last edited: