Evansjd2112
Novice Member
After some guidance and help to understand!
Recently moved to a Manhattan T3-R Freeview Recorder from a Humax DTR-T2000
Connected to a Denon AVR-X1300W.
All is good but with one niggling "feature" I cannot understand.
On the HD channels, the Denon detects a Digital signal.
Whether the channel is broadcasting in 5.1 or not, the Denon shows the input signal as 5.1 but on output I dont get any centre channel.
On the pic below, the Active Speakers 'C' is a different colour (hard to make out).
This was while playing The Simpsons which should be 5.1 according to the on screen info.
If I go to a non HD channel, the Denon detects it as stereo and I get the centre speaker working in Dolby Surround.
Manhattan is connected to Denon via HDMI.
On my Nvidia Shield using Plex, all is fine so I know its not the speaker/Amp.
Any ideas?
TIA
Recently moved to a Manhattan T3-R Freeview Recorder from a Humax DTR-T2000
Connected to a Denon AVR-X1300W.
All is good but with one niggling "feature" I cannot understand.
On the HD channels, the Denon detects a Digital signal.
Whether the channel is broadcasting in 5.1 or not, the Denon shows the input signal as 5.1 but on output I dont get any centre channel.
On the pic below, the Active Speakers 'C' is a different colour (hard to make out).
This was while playing The Simpsons which should be 5.1 according to the on screen info.
If I go to a non HD channel, the Denon detects it as stereo and I get the centre speaker working in Dolby Surround.
Manhattan is connected to Denon via HDMI.
On my Nvidia Shield using Plex, all is fine so I know its not the speaker/Amp.
Any ideas?
TIA