SHalcrow90
Novice Member
I have purchased a number of Energenie Mi-Home switches both one way and 2 way. I was easily able to install the one way switches but when it has come to installing the 2 way switch with slave in the hall way I am completely lost as i cannot figure out which cables to put where.
I have attached the instructions that come packaged with the switch.
The hallway switches have the following wires in them:
1) 5 total. 3 Red, 1 Blue and 1 Yellow. (I'm assuming this will be the box that I install the master switch)
2) 3 total. 1 Red, 1 Blue and 1 Yellow.
Any help with figuring out which wires go into each switch for the master and the slave would be appreciated.
I have attached the instructions that come packaged with the switch.
The hallway switches have the following wires in them:
1) 5 total. 3 Red, 1 Blue and 1 Yellow. (I'm assuming this will be the box that I install the master switch)
2) 3 total. 1 Red, 1 Blue and 1 Yellow.
Any help with figuring out which wires go into each switch for the master and the slave would be appreciated.