What i described is my custom settings based on HDR Game.Thank you! Will give these a go! What base picture style are you using? HDR Natural? HDR Game?
Can anyone suggest best settings for Xbox one x? I'm seeing noticeable difference in the smoothing even when just changing picture mode which seems odd!
Anyone who uses an Nvidia Shield to the Philips 803? I get sound glitches on my Oled 803 when using the Nvidia Shield.
Has anyone else had their set calibrated for HDR? Even on movie mode standard settings it’s way too dark...
I have only seen one person mentioned that he/she got the TV calibrated.
I struggled to get the picture to look good in HDR, but now a year+ later I'm still very satisfied with the settings I use, though wouldn't mind the settings of a calibrated TV, even though panels vary it would be interesting to try out!
Yes I agree. On HDR I have my brightness at 60. What do you have?
Yes there is, at least for resolution and hz, not sure about HDR information though.Is there any way to get the current picture information displayed on screen? E.g if I'm currently viewing content in 4k / HDR?
Yes there is, at least for resolution and hz, not sure about HDR information though.
I don't use the philips remote, I use a harmony and philips have a command called "info", which I have assign to my info-button on the harmony, that displays this information. Not sure if there is one on the remote as well, but you can at least pop up a menu (possibly action menu) where you then can click for the "info". Sorry that I don't know which button, but I don't use the remote. I'm sure someone here knows which button it is
The below settings are what I use. I think these are very nice, but at the same time I'm not sure if they are close to "correct". Comments (creative that is) are always welcome.
Note that if you use a Nvidia Shield (as I use now and then), you will need to set "Match content colour space" to "on", otherwise non-HDR content will have very bleak colours.
My SDR settings:
Picture mode: Movie
Color 45
Contrast 75
Sharpness 0
Brightness 53
Advanced - color
Color space wide*
Color temp Custom
Red WP 127
Green WP 97
Blue WP 83
Red BL 0
Green BL 0
Blue BL 0
Advanced - Contrast
Contrast mode Optimized for picture
Perfect Natural Reality off
HDR Perfect Off
Dynamic Contrast Off
Video contrast 100
Light sensor On**
Gamma 0
Advanced - sharpness Ultra resolution Off
Noise reduction Off
MPEG artifact reduction Off
Advanced - motion Motion style Off
Perfect Natural Motion Off
Perfect Clear Motion ON******
My HDR settings:
Picture HDR Movie
Color 65
Contrast 100
Sharpness 1
Brightness 80
Advanced - color
Color space Wide
Color temp Custom
Red WP 127
Green WP 97
Blue WP 83
Red BL 0
Green BL 0
Blue BL 0
Advanced - Contrast
Contrast mode Optimized for picture
Perfect Natural Reality off
HDR Perfect Minimum
Dynamic Contrast Off
Video contrast 100
Light sensor On**
Gamma -1
Advanced - sharpness Ultra resolution Off
Noise reduction Off
MPEG artifact reduction Off
Advanced - motion Motion style Off
Perfect Natural Motion Off
Perfect Clear Motion ON******
* Color space is set to wide even for SDR as it will always change to wide anyway when I use my Nvidia Shield, for some reason. Did some compensation for the brightness for this, if I remember correct.
** I like the light sensor
****** Perfect Clear Motion is always set to on, I'm not sure why this cannot be turned off anymore, noticed it today when I checked the current settings. Was possible before, though not sure then this was the last time. Does anyone know why this is?
Hope it helps
Im currently using this one. I got my 803 a year now, but im still sometimes switch between settings. This HDR settings seems a better fit than the one i was using. But at the end its always also personal taste.
Just set my TV to these settings.The below settings are what I use. I think these are very nice, but at the same time I'm not sure if they are close to "correct". Comments (creative that is) are always welcome.
Note that if you use a Nvidia Shield (as I use now and then), you will need to set "Match content colour space" to "on", otherwise non-HDR content will have very bleak colours.
My SDR settings:
Picture mode: Movie
Color 45
Contrast 75
Sharpness 0
Brightness 53
Advanced - color
Color space wide*
Color temp Custom
Red WP 127
Green WP 97
Blue WP 83
Red BL 0
Green BL 0
Blue BL 0
Advanced - Contrast
Contrast mode Optimized for picture
Perfect Natural Reality off
HDR Perfect Off
Dynamic Contrast Off
Video contrast 100
Light sensor On**
Gamma 0
Advanced - sharpness Ultra resolution Off
Noise reduction Off
MPEG artifact reduction Off
Advanced - motion Motion style Off
Perfect Natural Motion Off
Perfect Clear Motion ON******
My HDR settings:
Picture HDR Movie
Color 65
Contrast 100
Sharpness 1
Brightness 80
Advanced - color
Color space Wide
Color temp Custom
Red WP 127
Green WP 97
Blue WP 83
Red BL 0
Green BL 0
Blue BL 0
Advanced - Contrast
Contrast mode Optimized for picture
Perfect Natural Reality off
HDR Perfect Minimum
Dynamic Contrast Off
Video contrast 100
Light sensor On**
Gamma -1
Advanced - sharpness Ultra resolution Off
Noise reduction Off
MPEG artifact reduction Off
Advanced - motion Motion style Off
Perfect Natural Motion Off
Perfect Clear Motion ON******
* Color space is set to wide even for SDR as it will always change to wide anyway when I use my Nvidia Shield, for some reason. Did some compensation for the brightness for this, if I remember correct.
** I like the light sensor
****** Perfect Clear Motion is always set to on, I'm not sure why this cannot be turned off anymore, noticed it today when I checked the current settings. Was possible before, though not sure then this was the last time. Does anyone know why this is?
Hope it helps
Just set my TV to these settings.
I'm not sold yet but giving it a few days.
Thanks for sharing
In the meantime can anyone confirm if the UsB ports turn off in standby?
Nice to hear! I have the same experience. A few days ago i checked my old settings but they looked awfull compared with those we are using now.I'm quite liking them after a few days. Colours seem natural, brightness just right and think I'm going to stick with them (until I end up trying someone else's post!)
In the meantime can anyone confirm if the UsB ports turn off in standby?
I'm quite liking them after a few days. Colours seem natural, brightness just right and think I'm going to stick with them (until I end up trying someone else's post!)
Nice to hear! I have the same experience. A few days ago i checked my old settings but they looked awfull compared with those we are using now.
I have had the same issue after upgrading the FW, I think every time (3-4). Going from from android 7 to 8 Oreo even the DD5.1 via optical stopped working only 2ch PCM worked, both built-in apps and pass though (from Nvidia shield->TV->receiver via toslink).Is anyone else running optical from the TV to receiver?
I'm having some oddities where it works great for most of the time but it will flick off very briefly or crackle every now or then.
No idea if this is the TV but was using the receiver with a different TV in similar setup with no issues, so can only pin it to the TV
Anyone any thoughts?
I have had the same issue after upgrading the FW, I think every time (3-4). Going from from android 7 to 8 Oreo even the DD5.1 via optical stopped working only 2ch PCM worked, both built-in apps and pass though (from Nvidia shield->TV->receiver via toslink).
The solution for this is to do a factory reset (reinstall TV I think it is called), unfortunately this is the only way as far as I know, but it works.
Interesting, thanks. Glad it's not just me
I have done a factory reset (or whatever they called it) since the update (but prior to these settings) - is there something I should be ensuring following the reset?
Thanks. Isn't that just to reset up the channels tho? I don't have a satellite or aerial connected so I think every time I try that option I get stuckI just checked on my TV, the option to use is "Reinstall TV". The factory reset don't work for me.