Trinnov Audio Altitude16 AV Processor Review & Comments

Earthscope

Well-known Member
My dream Processor...:love: Thanks for the review Steve.:thumbsup:

You would have to pry this out of my dead hands if I had this in my house..:laugh:
 

Mister_Tad

Well-known Member
Isn't that what the Altitude32 is for, though?

Great review for a lust-worthy toy.

Am I right in thinking that due to the architecture, this never really goes out of date? If you can legitimately continue to use this for the next 20 years whilst staying on the cutting edge, suddenly it doesn't seem quite so much, as opposed to swapping out a £4000 processor (virtually written off after 5 years) a few times.

(granted, if an upgrade for say, the HDMI board, costs £4000 in itself, maybe that argument doesn't quite stick)
 
Last edited:

stevendep

Standard Member
What and where do i get movies to use all this?
The UHD discs they put on the market are so limited in quality that i don't see
the point going to spend over 2000.
I don't think there are many if any releases that can supply this processor with enough channels, bits and data to make a difference.
 

mb3195

Distinguished Member
What and where do i get movies to use all this?
The UHD discs they put on the market are so limited in quality that i don't see
the point going to spend over 2000.
I don't think there are many if any releases that can supply this processor w enough channels, bits and data to make a difference.
Isn’t that the point of Atmos and dts:x? They are not limited to channels, so in theory you could have 32 channels and the processor would distribute to the relevant channel correctly.
 

stevendep

Standard Member
Isn’t that the point of Atmos and dts:x? They are not limited to channels, so in theory you could have 32 channels and the processor would distribute to the relevant channel correctly.
yes correct but as you said in theory, but i don't know any that do
 

mb3195

Distinguished Member

OnTheFly

Well-known Member
Wow. I’m happy just looking at the pictures of it.
 

MadScientist

Active Member
Be mindful that this thread is for the Altitude 16 which is not upgradable like the 32 model
 

scoc

Well-known Member
I do not understand why the Lyngdorf MP50 is not being referenced as an alternative next to the Datasat option.
 

Spazturtle

Standard Member
Yeah with Atmos there should be no such thing as the left, right, center, surround, ect speakers. The whole point of Atmost is arbitrary speaker locations, you can have as many speakers as you want, and in any location and you tell the reviver where they are and it does all the magic for you.
 

stevendep

Standard Member
Yeah with Atmos there should be no such thing as the left, right, center, surround, ect speakers. The whole point of Atmost is arbitrary speaker locations, you can have as many speakers as you want, and in any location and you tell the reviver where they are and it does all the magic for you.
If i scan a disc:
Audio #1
ID : 3
Format : TrueHD
Format profile : TrueHD+Atmos / TrueHD
Codec ID : A_TRUEHD
Duration : 2 h 19 min
Bit rate mode : Variable
Bit rate : 3 218 kb/s
Maximum bit rate : 5 004 kb/s
Channel(s) : Object Based / 8 channels
Channel positions : Object Based / Front: L C R, Side: L R, Back: L R, LFE
Sampling rate : / 48.0 kHz
Frame rate : 1 200.000 FPS (40 SPF)
Compression mode : Lossless
Stream size : 3.15 GiB (4%)
Language : English
Default : Yes
Forced : No

It has all it's data in this stream being 8 channels. So how will it change it to 16?
The objects are fixed to a channel in this stream.
Front: L C R, Side: L R, Back: L R, LFE is there more the receiver can do?
 

Abacus

Banned
If i scan a disc:
Audio #1
ID : 3
Format : TrueHD
Format profile : TrueHD+Atmos / TrueHD
Codec ID : A_TRUEHD
Duration : 2 h 19 min
Bit rate mode : Variable
Bit rate : 3 218 kb/s
Maximum bit rate : 5 004 kb/s
Channel(s) : Object Based / 8 channels
Channel positions : Object Based / Front: L C R, Side: L R, Back: L R, LFE
Sampling rate : / 48.0 kHz
Frame rate : 1 200.000 FPS (40 SPF)
Compression mode : Lossless
Stream size : 3.15 GiB (4%)
Language : English
Default : Yes
Forced : No

It has all it's data in this stream being 8 channels. So how will it change it to 16?
The objects are fixed to a channel in this stream.
Front: L C R, Side: L R, Back: L R, LFE is there more the receiver can do?
It doesn’t, it spreads the 8 channels over 16 channels making sure the additional speakers fill in any holes in the sound field for a more immersive sound.

Think of it like a 5.1 or 7.1 system, with most receivers you can add width and height speakers (9.1, 11.1) even though there are no dedicated channels on the disc, the receiver just uses the speakers to fill in the holes that are inherent in 5.1, 7.1 system, thus you get a more seamless immersive sound.

Bill
 

stevendep

Standard Member
It doesn’t, it spreads the 8 channels over 16 channels making sure the additional speakers fill in any holes in the sound field for a more immersive sound.

Think of it like a 5.1 or 7.1 system, with most receivers you can add width and height speakers (9.1, 11.1) even though there are no dedicated channels on the disc, the receiver just uses the speakers to fill in the holes that are inherent in 5.1, 7.1 system, thus you get a more seamless immersive sound.

Bill
thanx for explaining
 

boabis

Active Member
Obviously I’m a lotto win away from ever affording this, but are there comparable standard active speakers that would connect directly to the Altitude16 via XLR?
 

Seriously Ltd

Distinguished Member
AVForums Sponsor
Yeah with Atmos there should be no such thing as the left, right, center, surround, ect speakers. The whole point of Atmost is arbitrary speaker locations, you can have as many speakers as you want, and in any location and you tell the reviver where they are and it does all the magic for you.
LCR, surround, surround back, front wide, top front, top rear, LFE etc are still required speaker locations.
 

Seriously Ltd

Distinguished Member
AVForums Sponsor
I do not understand why the Lyngdorf MP50 is not being referenced as an alternative next to the Datasat option.
The MP-50 is an absolute alternative to the Trinnov as are the Storm processors.

At this level they all sound stunning with each offering different subtleties and flexibility.
 

Similar threads

The latest video from AVForums

Podcast: LG SN7CY Soundbar Review, Hisense 55U7Q, LG Nano90, Best of the Month, B+W Sigourney Weaver

Trending threads

Latest News

Polk launches MagniFi 2 soundbar
  • By Andy Bassett
  • Published
Samsung pulls out of IFA 2020?
  • By Andy Bassett
  • Published
AVForums Podcast: 28th June 2020
  • By Phil Hinton
  • Published
LG Soundbar UK prices and availability for 2020 confirmed
  • By Andy Bassett
  • Published
Sky Brave New World trailer released
  • By Andy Bassett
  • Published
Top Bottom